C
HAPTER
15
| Multicast Filtering
Multicast VLAN Registration for IPv6
– 594 –
PARAMETERS
These parameters are displayed:
Configure Profile
u Profile Name – The name of a profile containing one or more MVR6
group addresses. (Range: 1-21 characters)
u Start IPv6 Address – Starting IP address for an MVR6 multicast
group. This parameter must be a full IPv6 address including the
network prefix and host address bits.
u End IPv6 Address – Ending IP address for an MVR6 multicast group.
This parameter must be a full IPv6 address including the network prefix
and host address bits.
Associate Profile
u Domain ID – An independent multicast domain. (Range: 1-5)
u Profile Name – The name of a profile to be assigned to this domain.
(Range: 1-20 characters)
WEB INTERFACE
To configure an MVR6 group address profile:
1. Click Multicast, MVR6.
2. Select Configure Profile from the Step list.
3. Select Add from the Action list.
4. Enter the name of a group profile to be assigned to one or more
domains, and specify a multicast group that will stream traffic to
participating hosts.
5. Click Apply.
Figure 356: Configuring an MVR6 Group Address Profile
To Next Page