C
HAPTER
22
| System Management Commands
System Status
– 718 –
COMMAND USAGE
u For a description of the items shown by this command, refer to
"Displaying System Information" on page 114 and "Displaying
Hardware/Software Versions" on page 115.
u No information will be displayed under POST Result, unless there is a
problem with the unit. If any POST test indicates “FAIL,” contact your
distributor for assistance.
EXAMPLE
Console#show system
System Description : DG-GS4528SE
System OID String : 1.3.6.1.4.1.36293.1.1.1.26
System Information
System Up Time : 0 days, 8 hours, 13 minutes, and 38.59 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-17-7C-94-40-00
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Fan:
Force Fan Speed Full : Disabled
Unit 1
Fan 1: Ok Fan 2: Ok
System Temperature:
Unit 1
Temperature 1: 39 degrees
Main Power Status : Up
Redundant Power Status : Not present
Console#
show tech-support This command displays a detailed list of system settings designed to help
technical support resolve configuration or functional problems.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
This command generates a long list of information including detailed
system and interface settings. It is therefore advisable to direct the output
to a file using any suitable output capture function provided with your
terminal emulation program.
To Next Page
Loading...
