REFERENCE
27080 Issue 1 August 98 5--29
Change Width
Permits adjustment of the width of
printedcharacters. Theadjustment
isonlyeffectivewithinternalstroke
generation.
If stroke generation is external, the width is displayed but is adjusted
byshaft encoderselectionandtheexternalstrokedividerratio (seepg.
5--41).
Narrow/Wide Width Limit: Limits dictated by the
print format.
Current Width Value Enter value between width limits. Increase
the value to reduce the width.
Using the increment keys gives immediate adjustment: typed--in
values are not effective until key option OK is used.
Function key options:
Cancel Discard changes.
OK Accept new settings.
To Next Page
Loading...
