OPTIONS
27080 Issue 1 Sept 98 10--25
PHOTOCELL ASSEMBLY FIBRE OPTIC
This detector is fitted on the side of the product line and can be used
where space is limited.
It produces a light beam across the product line, when the product
passes through the beam it causes it to be reflected back into the
photocell giving a printgo signal to the printer. The sensitivity can be
adjusted via an external potentiometer on the side of the sensor box.
Photocell Assembly Fibre Optic
TP7141_1
Cabinet Connectors
(External View)
MG001--1
Pin 1 = 0V
Pin 3 =
Product
Detector
Pin 4 =
+12V
Pin 2 =
Encoder
Pin 5 =
Screen
MG164_1
Spares List --Photocell Assembly F.Optic A--Series -- 37764
Five pin AXR to IP68 Plug Adaptor Cable (for use with
existing photocells/shaft encoders) -- 37771
To Next Page
Loading...
