APPENDIX A : INSTALLATION
27080 Issue 1 Sept 98 A--3
APPENDIX A : INSTALLATION
INTRODUCTION
WARNINGS (1) There are high voltages and delicate components
inside the Domino A--Series cabinets. The
electronic (top) compartment must not be opened
by unskilled personnel.
(2) For the safety of personnel, all items in the printer
requiring connection to earth/ground have cables
for this purpose. Any earth/ground cables
disconnected at any time must be refitted before
the printer is returned to operation.
Installation of a Domino A--Series printer consists of:
D Checking that all items have been delivered
D Preparing the printer for use
D Installing the printer and its associated equipment.
In the case of installing the printer, there is a wide range of possible
work areas and it is not possible to give specific instructions. The
informationprovided,therefore,consistsofthebasicrequirementsand
general information. It would be prudent to ensure that the basic
requirements can be met before installing the printer.
DominoA--Series printersshouldbemountedonastandor fittedwith
a stabiliser kit (see Part 10 : Options). Domino can also provide
mountings for the print head from a range of brackets and support
systems. For details see the Print Head Mounting Bracketry Reference
Manual, Domino Part No. 20643.
To Next Page
Loading...
