DISPLAY MESSAGES AND FAULT FINDING
4--18 27080 Issue 1 August 98
Print Size Too Small
Character height adjustment incorrect.
Adjust print height.
Jet alignment with deflector plates incorrect.
Check jet alignment.
Ink Pressure too high.
Check and reset pressure if required.
Solvent on deflector plates (after cleaning).
Dry deflector plates.
Print head too close to product.
Check position of print head.
Incorrect size nozzle fitted.
Check and replace if necessary.
Gutter Over--flowing Ink
Gutter filter blocked.
Replace gutter filter.
Gutter tube blocked.
Wash down and clear gutter.
Air leak preventing vacuum at gutter.
Check gutter circuit for leaks.
Vacuum pump head faulty.
Check/replace pump head.
Pressure set incorrectly.
Adjust pressure.
To Next Page
Loading...
Need help?
General
