Vigor3900 Series User’s Guide
112
It can detect the network traffic automatically to adjust the
power output and let Vigor3900 save the energy during the
period of low traffic. Click Enable to activate the
power/energy saving function if required.
Apply – Click it to save and exit the dialog.
Cancel – Click it to exit the dialog without saving anything.
Refresh
Renew current web page.
Interface
Display the name of the WAN port on the router.
Enable
Display the status of the profile. False means disabled; True
means enabled.
Duplex
Display the duplex used (full or half) by such profile.
Speed
Display the transmission rate (10M, 100M, 1000M or Auto)
of the date for such profile.
Flow Control
Display if such function is enabled or disabled.
802.3az
Display such function is enabled or disabled.
To Next Page
Loading...
