Vigor3900 Series User’s Guide
265
WAN
Disconnection
Enable – When disconnection happened to WAN interface,
the router system will send the alert message to the
recipient.
WAN
Reconnection
Enable - When reconnection happened to WAN interface,
the router system will send the alert message to the
recipient.
VPN Disconnection
Enable – When disconnection happened to a VPN tunnel,
the router system will send the alert message to the
recipient.
VPN Reconnection
Enable - When reconnection happened to a VPN tunnel, the
router system will send the alert message to the recipient.
Temperature
Enable - When the temperature is out of range, the router
system will send the alert message to the recipient.
Router Reboot
Enable - When the router reboots, the router system will
send the alert message to the recipient.
CPU Usage
Enable – When the CPU usage reaches a certain value, the
router system will send the alert message to the recipient.
Memory Usage
Enable – When the memory usage reaches a certain value,
the router system will send the alert message to the
recipient.
TX Usage/RX
Usage
Enable – When TX/RX usage reaches a certain value, the
router system will send the alert message to the recipient.
High Availability
Enable – When such Vigor router becomes the “Master”
device in the application of HA, the router system will send
the alert message to the recipient.
Syslog
Enable – Such notification will be recorded in Syslog.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4. Enter all the settings and click Apply.
5. A new notification object profile has been created.
To Next Page
Loading...
