Copyright 2008 Baker Hughes Company.
English–PACE5000/6000 Instruction Manual | v
Contents
1. Description 1
1.1 Introduction 1
2. Installation 3
2.1 Packaging 3
2.2 Packaging for Storage or Transportation 3
2.3 Preparation for Use 3
2.4 Connecting to PACE 3
2.4.1 Pressure Adaptors 4
2.4.2 Pressure Connection 5
2.5 Connecting to UUT 6
2.6 System 6
2.7 Supply Equipment 7
2.7.1 Pneumatic Connection Examples 8
2.8 Rack-mount Option 10
2.9 Power Connection 12
2.9.1 Pressure Control Module DC Power and Logic Input Connectors 12
2.10 Communication Connection 13
2.10.1 RS-232 Interface 13
2.10.2 IEEE 488 Interface 14
3. Operation 17
3.1 Preparation 17
3.2 Power-up Sequence 17
3.3 Measure Mode 19
3.3.1 Auto-Range 20
3.3.2 Controller Off – Increasing Set-point 20
3.3.3 Controller Off – Decreasing Set-point 21
3.3.4 Controller On – Increasing Set-point 21
3.3.5 Controller On – Decreasing Set-point 21
3.4 Control Mode 21
3.4.1 Controlling to a New Set-point 22
3.4.2 Effort Meter 23
3.4.3 Controlling to Ambient/Zero Pressure 23
3.5 Operation and Example Procedures 24
3.5.1 Introduction 24
3.5.2 Measure and Control Modes 24
3.5.3 Task 25
3.5.4 Divider 26
3.5.5 Divider Menu Structure 26
3.5.6 Preset 27
3.6 Global Setup Selections 28
3.6.1 Status Area Settings 29
3.7 Barometric Reference Option 30
3.8 Supervisor Setup 31
3.9 Instrument Status 32
3.9.1 Software 33