Druck PACE5000 User Manual

Copyright 2008 Baker Hughes Company.
English–PACE5000/6000 Instruction Manual | vii
6.4.8 Zero Gauge Control 47
6.5 Global Setup 47
6.6 Status 48
6.7 Vent Setup 48
6.8 Global Setup 48
6.8.1 Supervisor Setup 48
6.8.2 Calibration 48
6.8.3 Save/Recall user setup. 48
6.8.4 Display 48
6.9 Supervisor Setup 49
6.9.1 Protective Vent 49
6.9.2 In-Limits 49
6.9.3 Alarms 49
6.9.4 Communications 49
6.9.5 Timeout 56
6.9.6 Idle Timeout 56
6.9.7 Gas Head Correction 56
6.9.8 Lock Tasks 56
6.9.9 Change PIN 56
6.9.10 User Defined Units 56
6.9.11 Instrument Alias Name 57
6.9.12 Language 57
6.9.13 Restore as Shipped Settings 58
6.10 Option Enable Process 58
6.11 Leak Test Option 59
6.12 Switch Test Option 61
6.12.1 Start 61
6.12.2 Test 62
6.12.3 End 62
6.12.4 Procedure 62
6.13 Test Program Option 62
6.13.1 Creating a Test Program 63
6.13.2 Editing an Existing Test Program 63
6.13.3 Running a Test Program 63
6.13.4 Copying a Test Program 63
6.13.5 Example Program 65
6.13.6 Programming Loops 66
6.14 Barometric Reference Option 67
6.14.1 Zeroing the Reference Sensor 69
6.15 Aeronautical Option 71
6.15.1 Leak Testing 71
6.15.2 Aeronautical Testing 71
6.15.3 Example of Altitude and Airspeed Testing 72
6.15.4 Units 72
6.15.5 Reference Pressure 73
6.15.6 Go to Ground 73
6.15.7 Control of Aeronautical Parameters 74
6.16 Analog Output Option 76
6.17 Volts-free Contact Option 77
6.18 Burst Pressure Testing Option 77
6.18.1 Selecting Burst Pressure Task 78
6.18.2 Test Parameter Entry 78
6.18.3 Example Burst Pressure Test 80

Druck PACE5000 Specifications

General

Brand	Druck
Model	PACE5000
Category	Controller
Language	English