1
Introduction
The cause of most accidents is failure to adhere to basic safety rules and observe
safety instructions. It is important to prevent potential causes of accidents from
occurring. In order to do so, read this manual carefully, and be sure to understand
all the safety instructions and correct inspection and servicing procedures that it
provides before beginning repair or servicing work.
Repairing or servicing the machine with insufficient knowledge about it could
lead to unforeseen accidents.
It is not possible to anticipate and describe in a manual such as this every possi-
ble hazard that could arise in the course of repair and servicing. Therefore, besides
observing the safety instructions marked in this manual and on the machine's
labels, service personnel should be safety-conscious and take other safety precau-
tions as necessary. When performing repair or service work not covered by this man-
ual, you should obtain safety guidance from an appropriately knowledgeable person.
Copyright 2007
DUPLO SEIKO CORPORATION
All Rights Reserved
To Next Page
Loading...
Need help?
General
