200
c HELP Mode Function and Operation Procedures
chap.7
¡ HELP Mode Descriptions
ROM Version Display
2
Mode Name: Resolution
2
Serial Number
2
Date and Time
2
Main PCB Version / Panel PCB Version / FPGA Version / Tape Cluster ROM Version
(Only when the tape clusters TAP-05 - 12 are installed)
2
Service Call Contact Number (if available)
¡ Operation procedure
1.
Enter
“
000
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
2.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Call the HELP mode
“
H-000
”
.
3.
Check the ROM version displayed.
Check the display.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...
Need help?
General
