HELP
mode No.
Item Function
Page
(1) Test Pattern
(2)
Vertical Reg. Adjustment
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
Paper Feed Adjustment
* To enter H-039,
be sure to set G of
HELP-061 (5 at Page 2)
to "1".
Scanner Read Adjustment
ADF Read Adjustment
Scan Level Adjustment
ADF Level Adjustment
Master Feed Adjustment
Online Master Making
Adjustment
Thermal Head Setting
For Factory Adjustment
Model Setting
Printing the test pattern
Vertical Registration Adjustment
-
-
-
-
-
-
-
-
[Page1] Adjustment (Paper feed speed)
[Page2] Adjustment (Paper feed angle)
[Page3] Adjustment (Paper feed lead edge sensor angle)
[Page4] Adjustment (Paper feed limit angle)
[Page5] Adjustment (Paper feed loop level)
[Page1] Adjustment
: Scan horizontal (main scan) magnification, Scan vertical (sub scan)
magnification, Scan lead edge start position, Scanner horizontal reading center
[Page2] Adjustment : Scanner read width, Scanner read length, Scanner
move range
[Page1] Adjustment :
ADF horizontal (main scan) magnification, ADF vertical (sub scan)
magnification, ADF lead edge start position, ADF horizontal reading center
[Page2] Adjustment : ADF read width, ADF read length, ADF feed range,
ADF trail edge end position
[Page1] Adjustment (TEXT mode, TEXT/PHOTO mode)
[Page2] Adjustment (PHOTO/TEXT mode, PHOTO mode)
[Page1] Adjustment (TEXT mode, TEXT/PHOTO mode)
[Page2] Adjustment (PHOTO/TEXT mode, PHOTO mode)
[Page1] Adjustment (Master Clamp magin, M-Make speed magnification,
M-Make feed volume magnification)
[Page2] Adjustment (M-Make horizontal start position, M-Make vertical
start position, Master length on drum
Adjustment (M-Make horizontal start position : online,
M-Make vertical start position : online)
Adjustment Thermal head
(RESISTANCE RANK, RESISTANCE RANK OFFSET)
CCD setting
Setting (Rental machine setting)
HELP
-030
HELP
-031
HELP
-032
HELP
-033
HELP
-034
HELP
-035
HELP
-036
HELP
-037
HELP
-038
HELP
-039
HELP
-042
HELP
-043
HELP
-044
HELP
-045
HELP
-046
HELP
-047
HELP
-048
HELP
-049
HELP
-050
241
-
243
-
-
-
-
-
-
-
-
244
244
244
244
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
To Next Page
Loading...
Need help?
General
