5
Safety instructions
' Precautions for safe servicing
• Always remove the power cord plug from the outlet before starting work.
a Otherwise, you could get a shock or your hands/fingers could be injured.
• However, the plug must be left connected to the outlet when performing function checks (of
individual motors, a given series of operations, or electrical circuits). When motors are
operated alone in function checks, interlocks are deactivated, so be aware of the conditions and
positions of related equipment, and take great care not to put your hands or fingers into
moving parts.
• The cutter unit contains hazardous sharp blades. Exercise great care when inspecting the cutter
unit or replacing it or its parts.
a Otherwise, your hands/fingers could be injured.
• Do not touch the rotating parts when operating the drum removal button and JOG switch or
while the machine is running.
a Otherwise, your hands/fingers could get caught and crushed between the drum and rollers.
' Working clothes
• Wear clothing that enables you to work safely.
Work clothing (overalls, etc) should be close-fitting.
Warning
' Tools
• Use tools that are appropriate for the work.
CAUTION
3. Cautions for maintenance, inspection and servicing
• The tape clusters have hazardous blades. Exercise care when inspecting or replacing the
blades.
a Otherwise, your hands/fingers could be injured.
If optional tape clusters are used
To Next Page
Loading...
Need help?
General
