Duplo DP-S550 - Page 255

254
c HELP Mode Function and Operation Procedures
chap.7
(2) Master Feed Adjustment (2 pages in total)
Page 2 : Adjustment.
2
M-MAKE HORIZONTAL START POS.
2
M-MAKE VERTICAL START POS.
2
MASTER LENGTH ON DRUM
¡ Operation procedure
1.
3.
Adjust the master feed.
2.
Enter
“
046
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-046
”
.
Touch the
(
arrow
)
on the screen lower right once to switch to Page 2.
Change the screen.
4.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.