EasyManuals Logo

DURKOPP ADLER 1767 User Manual

DURKOPP ADLER 1767
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
Decommissioning
Operating Instructions 1767 - 00.0 - 12/2016 99
8 Decommissioning
You need to perform a number of activities if the machine is to be
shut down for a longer period of time or completely decommissioned.
To decommission the machine:
1. Switch off the machine.
2. Unplug the power plug.
3. If applicable, disconnect the machine from the compressed
air supply.
4. Remove residual oil from the oil pan using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the control to protect it from soiling.
7. Cover the entire machine if possible to protect it from contam-
ination and damage.
WARNING
Risk of injury from a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect the
machine.
CAUTION
Risk of injury from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.

Table of Contents

Other manuals for DURKOPP ADLER 1767

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DURKOPP ADLER 1767 and is the answer not in the manual?

DURKOPP ADLER 1767 Specifications

General IconGeneral
BrandDURKOPP ADLER
Model1767
CategorySewing Machine
LanguageEnglish

Related product manuals