Operation
32 Operating Instructions 1767 - 00.0 - 12/2016
6. Feed the hook thread through the slot (1) and pull it approx.
3 cm further.
7. Close the bobbin case retainer (6).
4.7 Thread tension
Together with the hook thread tension, the needle thread tension
influences the final seam pattern. With thin sewing material, ex-
cessive thread tension can lead to undesired gathering and thread
breakage.
Proper setting
If the tension of needle thread and hook thread is identical, the
thread interlacing lies in the middle of the sewing material.
Set the needle thread tension so that the desired seam pattern is
achieved with the lowest possible tension.
Fig. 14: Thread tension
(1) - Identical needle thread and hook thread tension
(2) - Hook thread tension higher than needle thread tension
(3) - Needle thread tension higher than hook thread tension
To Next Page
Loading...
Need help?
General
