Operation
28 Operating Instructions 1767 - 00.0 - 12/2016
4.5 Winding the hook thread
4.5.1 Threading the hook thread
Fig. 10: Threading the hook thread (1)
To wind the hook thread:
1. Fit the thread reel on the reel stand (2).
2. Thread the hook thread through the slots of the thread
guide (1) as shown above.
WARNING
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before threading the
thread.
(1) - Thread guide (2) - Thread reel holder
To Next Page
