DURKOPP ADLER 1767 - Setting the hook thread tension

Operation
Operating Instructions 1767 - 00.0 - 12/2016 35
4.7.2 Setting the hook thread tension
Fig. 16: Setting the hook thread tension
To set the hook thread tension:
1. Turn the adjusting screw (1) using a screwdriver (part number
9081 500000).
• Increase the hook thread tension: Turn the adjusting
screw (1) clockwise
• Reduce the hook thread tension: Turn the adjusting
screw (1) counterclockwise
WARNING
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before you set the hook
thread tension.
(1) - Adjusting screw (2) - Screwdriver
①
②