Setup
92 Operating Instructions 1767 - 00.0 - 12/2016
7.10.3 Connecting the machine head
To connect the machine head:
1. Insert the plug on the connecting cable for the machine head
into the socket of the respective control.
7.10.4 Establishing equipotential bonding
The grounding wire conducts away any static charging of the
machine head.
Fig. 47: Establishing equipotential bonding
To establish equipotential bonding:
1. Tilt the machine head.
(1) - Control grounding wire
(2) - Screw
(3) - Motor grounding wire
(4) - Toothed lock washer
To Next Page
Loading...
