Operation
22 Operating Instructions 1767 - 00.0 - 12/2016
4.4 Threading the needle thread
In all machines the thread from the thread reel is fed to the machine
via the thread guide.
Fig. 5: Threading the needle thread
To thread the needle thread:
1. Fit the thread reel on the reel stand (2).
2. Insert the needle thread through the slots of the thread
guide (1) as shown above.
WARNING
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before threading the
needle thread.
(1) - Thread guide (2) - Thread reel holder
To Next Page
Loading...
