Operation
Operating Instructions 1767 - 00.0 - 12/2016 19
4.3 Inserting/changing the needle
Order
After switching to a different needle thickness, adjust the distance
between hook and needle ( Service Instructions).
Disturbance if hook distance is incorrect
After inserting a thinner needle:
• Missing stitches
• Damage to the thread
After inserting a thicker needle:
• Damage to the hook tip
• Damage to the needle
WARNING
Risk of injury from sharp parts!
Punctures possible.
Switch off the machine before changing the needle.
DO NOT reach into the needle tip.
NOTICE
Property damage may occur!
There is a risk of machine damage, needle breakage or
damage to the thread.
Check the distance to the hook tip after inserting a needle
with a different thickness.
If necessary, readjust the distance between needle tip and
hook tip.
To Next Page
Loading...
