DURKOPP ADLER 1767 - Thread button group functions; Setting the start bartack

Programming
54 Operating Instructions 1767 - 00.0 - 12/2016
D- • Decreases
parameter
• Selects
subprogram
Reset • Resets the
(piece) counter
④
Seam program button
group
Seam program I • Activates seam
program I
 Instructions
for use
DAC basic/
classic
Seam program II • Activates seam
program II
 Instructions
for use
DAC basic/
classic
Seam program III • Sets seam
program III
 Instructions
for use
DAC basic/
classic
No. Button Function Reference