Technical data
162 Service Instructions 867-M PREMIUM - 03.0 - 05/2017
Characteristics
• sewing motor (DA direct drive) integrated into the machine head with
max. speed of 3,800 rpm (depending on the hook size used)
• Control DAC comfort with OP3000 control panel
• Actuators without compressed air
• large (L) or extra-large (XXL) vertical hook
• Electromagnetic thread cutter
• programmable setting of the stitch length via stepper motor (max. 12 mm)
• programmable adjustment of the alternating sewing feet via stepper
motor (max. 9mm)
• Material thickness detection with programmable functions (sewing
speed, sewing foot pressure, sewing foot stroke, and thread tension)
• programmable sewing foot pressure via stepper motor (in combination
with compression spring); depending on material thickness detection
• Sewing foot lift controlled by stepper motor (max. 20 mm, same actua-
tor as the one used for the sewing foot pressure)
• programmable thread tension (electromagnetically) with speed com-
pensation; also depending on material thickness detection
• Electronic handwheel (ENP 10-1)
• integrated winder with winding assistant
• Safety snap-on coupling prevents any misadjustment or damage to the
hook in the event of a thread jamming
• automatic wick lubrication with an inspection glass housed in the arm
for lubricating the machine and the hook (including low oil level warning
light)
• all subclasses with 6 push buttons, additional button element can be
assigned push button functions
• Use of CTB bobbins in combination with cylindrical braking and lifting
spring, hook covers with inspection glasses
• Integrated LED sewing lamp including power supply and dimming function
• intuitive control software with graphical user interface
• up to 999 different seam programs supporting a maximum of 30 individual
seam sections each. Sequential mode for a maximum of 9 interlinked
seam programs
To Next Page
Loading...
Need help?
General
