Maintenance
Service Instructions 867-M PREMIUM - 03.0 - 05/2017 147
21.2.1 Lubricating the machine head
Fig. 114: Lubricating the machine head
Proper setting
The oil level must not raise above the MAX marking (2) or drop below the
MIN marking (3).
If the oil level falls below the minimum level marking (3), the oil level indi-
cator lights up in red.
To top off the oil:
1. Fill oil through the oil filler opening (1) up to the MAX marking (2).
2. Turn the machine off, then on again after refilling oil.
The red light will turn off.
(1) - Oil filler opening
(2) - MAX marking
(3) - MIN marking
To Next Page
Loading...
