DURKOPP ADLER 867-M Premium - Setting the Language Selection (Language) Parameter; Setting the Parameter View (Parameterview) Parameter

Programming
Service Instructions 867-M PREMIUM - 03.0 - 05/2017 119
20.6.1 Setting the Language selection (Language) parameter
Selecting from various languages for the display on the control panel.
To set the Language selection parameter:
1. Select the Language parameter.
2. Select the desired language with the
▲/▼ buttons.
3. Press the OK button to confirm the selection.
 The language is set immediately.
20.6.2 Setting the Parameter view (ParameterView) parameter
The display of the parameter numbers can be activated or deactivated.
When activated, the parameter numbers appear on the display on the left
next to the menu items.
Fig. 91: Example ParameterView inactive
Fig. 92: Example ParameterView active
When ParameterView is active, the item ParameterCall is added to
the menus in both Manual mode and Automatic mode. This function is de-
scribed separately ( p. 102).
On/Off.........
Start Trim° 125
Stop Trim° 20
°
Speed 150
On/Off.........
Start Trim° 125
Stop Trim° 20
°
Speed 150
T0203
T0200
T0210
T0211