DURKOPP ADLER 878-M PREMIUM - Setting the Programs (Programs) Parameter

Programming
100 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Fig. 71: Data loss warning message
6. To cancel, press the ESC button; to continue, press the OK button.
 The data transfer begins and a message appears, stating that the
USB key must not be removed.
Fig. 72: USB key warning
 The message disappears after the data transfer.
17.11.3 Setting the Programs (Programs) parameter
It is possible to transfer all or just specific programs to the USB key or the
control.
To transfer the programs:
1. Plug the USB key into the socket (1) on the control (2).
+
All Data will lost
OK ESC
Erase USB-Stick
+
Don´t remove USB!
Please Wait!