DURKOPP ADLER 878-M PREMIUM Service Instructions

Programming
Service Instructions 878-M PREMIUM - 03.0 - 10/2019 99
Fig. 69: USB key warning
 The message disappears after the data transfer.
17.11.2 Setting the Only data (OnlyData) parameter
Only the data for parameter settings and calibration values are transfered
to the USB key or the control.
To transfer the parameter settings and calibration values:
1. Plug the USB key into the socket (1) on the control (2).
Fig. 70: Data Transfer submenu
2. Call up the Service > Data Transfer > Only Data menu item.
3. Press the OK button to confirm the selection.
4. Use the
▲/▼ buttons to choose between the options Load from USB
or Store to USB.
5. Press the OK button.
 The following warning message appears:
+
Don´t remove USB!
Please Wait!
(1) - Connection (2) - Control
①
②

DURKOPP ADLER 878-M PREMIUM Specifications

General

Brand	DURKOPP ADLER
Model	878-M PREMIUM
Category	Sewing Machine
Language	English