Programming
102 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
11. Press the OK button to confirm the selection.
12. Press the
► button; the selection Destination, Select All,
Deselect All appears.
13. Select the Destination option with the
▲/▼ buttons.
14. Press the OK button to confirm the selection.
15. Select the desired folder with the
▲/▼ buttons or press the ► button
and create a new folder with the Create Folder (New folder) option.
16. Press the OK button to confirm the selection.
17. Use the numeric buttons to enter the folder name.
18. Press the OK button to confirm the name.
19. Press the
► button and select the Copy option.
20. Press the OK button to confirm the selection.
The data transfer begins and a message appears, stating that the
USB key must not be removed.
Fig. 75: USB key warning
The message disappears after the data transfer.
17.12 Selection of tension plate type
To change the tension plate type must be selected the machine class (Ma-
chineClass). Can be choose from these types:
• Electronic
• Rotary
• Mechanic
Change of tension plate type can be done at any time in this way:
1. Hold the S button pressed down, and at the same time switch on the
machine with the main switch.
2. Use the numeric buttons to enter the code 85627.
3. Select the menu MachineClass.
4. Select the class 878 and the appropriate subclass.
5. Select the tension plate type.
Please Wait!
To Next Page
Loading...
