Programming
82 Service Instructions 878-M PREMIUM - 03.0 - 10/2019
17.5.18 Setting the Threading mode (Threading) parameter
Various settings can be made for the threading mode. The options are
explained in more detail in the table.
17.6 User configuration (UserConfig) submenu
Settings can be made here that are designed to make working on the
machine in various external conditions easier for the operator.
The parameters are explained in more detail in the subchapters.
The menu is divided into the following submenus:
Menu item Setting options
Down The sewing foot is lowered in threading mode.
Up The sewing foot is lifted in threading mode.
Pedal The sewing foot can be lifted or lowered with the pedal in threading
mode.
Parameter Explanation Reference
Language Language selection p. 83
ParameterView Parameter view p. 83
Input Config Configuration of the inputs p. 84
Output Config Configuration of the outputs p. 85
StitchFunctions Stitch functions p. 86
Scanner Bar code reader (optional accessories)
Interface Interface for the bar code reader
Programs Programs p. 87
Jog-Dial Electronic handwheel p. 87
Lock Access rights p. 88
QONDAC Activity recording
FastMenuKeys Can be switched between standard and
simplified display menu.
p. 89
Contrast Contrast p. 89
Brightness Brightness p. 89
To Next Page
Loading...
Need help?
General
