Dynapac D.ONE - Check the Air Intake Lines

9. Press the button (1) on the maintenance indicator.
ð
The maintenance indicator is reset.
8.8.4 Check the air intake lines
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Allow the engine to cool down.
3. Check the condition and tight fit of all air intake lines and
hose clamps.
4. If necessary, replace any damaged air intake lines or hose
clamps.
1
B-720-0098
Fig. 145
B-720-0099
Fig. 146
Maintenance – Every 250 operating hours/annually
D.ONE
119