Dynapac D.ONE - Checking the Fuel Level; Topping up Fuel

5.4 Checking the fuel level; topping up fuel
NOTICE!
Danger of engine damage!
– Never run the fuel tank empty, as otherwise the
fuel system needs to be bled.
– Monitor the entire refuelling process.
– Contaminated fuel can cause malfunction or
even damage of the engine. If necessary, fill in
fuel through a screen filter.
– Use only fuel of the permitted specification
Ä Chapter 8.3.2 „Fuel“ on page 106.
1. Check the filling level in the fuel tank.
2. Refuel, if required, after first shutting down the engine.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1. Clean the area around the filling port.
2. Unscrew the cap and fill with fuel.
3. Close the cap.
B-SYM-1069
Fig. 47
Refuelling
Diesel
B-720-0085
Fig. 48
Checks prior to start up – Checking the fuel level; topping up fuel
D.ONE
65