Dynapac D.ONE - Final Shut-Down of Machine

11.1 Final shut-down of machine
If the machine can no longer be used and needs to be shut down
for good, the following work is to be performed and the machine
disassembled by an officially recognised specialist workshop.
WARNING!
Health hazard caused by fuels and lubricants!
– Safety regulations and environmental protec-
tion regulations must be followed when han-
dling fuels and lubricants Ä Chapter 3.4 „Han-
dling fuels and lubricants“ on page 25.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
n
Safety goggles
1. Remove the batteries and dispose of in compliance with legal
regulations.
2. Empty the fuel tank.
3. Drain the hydraulic oil tank.
4. Drain the coolant from the cooling system and engine.
5. Drain engine oil from the engine and exciter housing.
Disposal – Final shut-down of machine
D.ONE
168