Dynapac D.ONE - Charging the Power Pack in the Machine

6.6.2 Charging the power pack in the machine
1.
Park the machine safely
Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Switch on the main battery switch.
3. Remove the safety cap (1) and connect the cable (2) to the
remote control.
ð
The battery starts charging.
4. Once the battery is charged, turn the main battery switch
anticlockwise and pull it off.
B-SWI-0079
Fig. 112
2
1
B-720-0029
Fig. 113
B-SWI-0079
Fig. 114
Operation – Remote control battery (radio operation)
D.ONE
93