Dynapac D.ONE - Parking the Machine in Secured Condition

6.5 Parking the machine in secured condition
1. Switch the vibration off.
2. Drive the machine onto level, firm ground.
3. Set the travel lever to “middle” position to stop the machine.
NOTICE!
Danger of engine damage!
– Do not shut down the engine all of a sudden
from full load speed, but let it idle for about two
minutes.
4. Turn the ignition key to position “0” and pull it out.
5. Open the flap.
6. Turn the main battery switch anticlockwise and pull it out.
AUTOMATIC
MAX
MIN
B-720-0024
Fig. 105
B-720-0028
Fig. 106
B-SWI-0079
Fig. 107
Operation – Parking the machine in secured condition
D.ONE
90