Dynapac D.ONE - Page 91

1. During cable operation, remove the cable (2) and screw on
the protective cap (1).
2.
NOTICE!
Remote control may be damaged by water
ingress!
– Do not cleaning the remote control with
water jets.
After work, clean the remote control with a clean cloth or
brush.
3. Place the remote control (2) in the holding fixture (3) and
close the flap (1).
2
1
B-720-0029
Fig. 108
3
2
1
B-720-0019
Fig. 109
Operation – Parking the machine in secured condition
D.ONE
91