Dynapac D.ONE - Every 1000 Operating Hours; Adjusting the Valve Clearance

8.10 Every 1000 operating hours
8.10.1 Adjusting the valve clearance
NOTICE!
Danger of engine damage!
We recommend to have this work carried out by
trained personnel or our after sales service.
– Before checking the valve clearance let the
engine cool down for at least 30 minutes. The
engine oil temperature must be below 80 °C
(176 °F).
Valve clearance
Intake/exhaust valve 0.15 mm to 0.19 mm
(0.006 in to 0.007 in)
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Allow the engine to cool down.
3. Remove the valve cover.
Preparations
B-720-0107
Fig. 162
Maintenance – Every 1000 operating hours
D.ONE
128