Dynapac D.ONE - Remote Control Battery (Radio Operation); Changing the Battery

6.6 Remote control battery (radio operation)
The remote control battery can be charged in different ways:
n Charge the battery in the machine via cable.
n Charge the battery in the external battery charger (optional
equipment).
Battery recharging time is approx. 6 hours.
Remote control operating time with a full charge is approx.
60 hours.
6.6.1 Changing the battery
1. Turn the ignition key to position “0” and pull it out.
2. Press the battery forwards to insert and downwards to
remove it from the battery compartment.
3. Insert the replacement battery into the battery compartment
and click into place.
B-720-0028
Fig. 110
B-720-0078
Fig. 111
Operation – Remote control battery (radio operation)
D.ONE
92