Dynapac D.ONE - Replacing the Fuel Filter; Bleeding the Fuel System

16. Fill the rear drum with oil via the drain opening.
17. Screw the bleed screw (1) and drain plug (2) back in tightly.
18. Lower the machine.
19. Dispose of oil in line with environmental regulations.
8.8.6 Replacing the fuel filter; bleeding the fuel system
8.8.6.1 Replacing the fuel filter
NOTICE!
Danger of engine damage!
– Ensure strict cleanliness! Thoroughly clean the
area around the fuel filters.
– Air in the fuel system causes irregular running
of the engine, a drop in engine power, stalls the
engine and makes starting impossible.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely
Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Remove the bolts and washers (2).
3. Open the central electrics (1).
B-720-0048
1
2
Fig. 152
2
2
1
B-720-0052
Fig. 153
Maintenance – Every 250 operating hours/annually
D.ONE
122