5.2 Visual inspections and function tests
1. Check the condition of the hydraulic oil tank and hydraulic
lines and for leaks.
2. Check the condition of the fuel tank and fuel lines and for
leaks.
3. Check the cooling system for contamination, damage and
leaks.
4. Check the bolted connections are tight and secure.
5. Check the engine and exhaust system for leaks.
6. Check the belt drive for damage.
7. Check the machine and remote control for contamination and
damage.
Checks prior to start up – Visual inspections and function tests
D.ONE
63
To Next Page
Loading...
