Dynapac D.ONE - Checking the BOSS Safety System

6.2.3 Checking the BOSS safety system
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
n
Hearing protection
1. Strap on the remote control and hold in front of your body.
To check the safety device make sure the
distance from the remote control to the floor
is 1 m (1.1 yd).
2. Turn the toggle switch for operating mode to the “right” posi-
tion.
3.
Start the engine
Ä Chapter 6.2.4 „Starting the
engine“ on page 81.
4. Walk behind the machine with the remote control.
5. Let the machine travel towards you slowly until it stops.
6. Measure the distance between the machine and the remote
control housing.
Nominal value > 1.2 m (1.3 yd)
B-720-0012
ca. 1 m
approx. 1.1 yd
Fig. 79
B-720-0115
Fig. 80
B-720-0056
> 1,2 m
> 1.3 yd
Fig. 81
Operation – Start-up procedure
D.ONE
79