Dynapac D.ONE - Fuse Assignment; Notes on Safety; Fuse Box

10.4 Fuse assignment
10.4.1 Notes on safety
WARNING!
Danger of injury by fire in the machine!
– Do not use fuses with higher ampere ratings
and do not bridge fuses.
10.4.2 Fuse box
Fuse Amperage Designation
F119 20 A Fuse for engine
F103 10 A Fuse for potential 15
F14 25 A Fuse for engine shut-down solenoid
F54 5 A Fuse cable remote control
F243 3 A Fuse for TELEMATIC potential 30
F67 25 A Fuse control potential 30
F48 30 A Fuse for pre-heating
F275 5 A Fuse for ECONOMIZER
Fig. 202
Troubleshooting – Fuse assignment
D.ONE
155