Dynapac D.ONE - As Required; Checking;Adjusting the Scrapers; Cleaning the Radiator Module

8.13 As required
8.13.1 Checking/adjusting the scrapers
DANGER!
Danger to life caused by machine movements!
– Never step in front of or behind the drums/
wheels while the engine is running.
Protective equipment:
n
Working clothes
n
Safety shoes
n
Protective gloves
1.
Park the machine safely Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Check the condition of the eight scrapers (four per drum);
clean if necessary.
3. Replace any worn scrapers.
4. Check the gap between the scrapers and drum.
Nominal value Approx. 5 mm (0.2 in)
5. If necessary, loosen the screws (1) and adjust the gap
evenly.
6. Tighten the screws.
8.13.2 Cleaning the radiator module
NOTICE!
Components may get damaged!
– Do not bend or damage cooling fins.
– Do not clean with high pressure.
1.
Park the machine safely Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 90.
2. Allow the engine to cool down.
B-720-0088
Fig. 177
1
B-720-0064
Fig. 178
Maintenance – As required
D.ONE
137