Dynapac D.ONE - Page 87

2. Switch the toggle switch for vibration pre-selection to the
"front” position.
3. Use the toggle switch for vibration to pre-select the required
amplitude.
4. Move the travel lever forwards or backwards.
ð
The machine travels in the required travel direction and
the vibration is switched on.
5. To switch off vibration return the travel lever towards the
“middle” position.
ð
The vibration is switched off and the machine brakes until
it comes to a halt.
B-720-0026
Fig. 95
B-720-0025
Fig. 96
MIN
MAX
AUTOMATIC
B-720-0022
Fig. 97
AUTOMATIC
MAX
MIN
B-720-0024
Fig. 98
Operation – Working with vibration
D.ONE
87