7Chapter 1: Basic Setup
CONNECTION INSTRUCTIONS
SETUP #3 PERFORMANCE SETUP
MIDI In
Morpheus is controlled by MIDI messages received at the MIDI In
connector. Connect the MIDI In of Morpheus to the MIDI Out
connector of a MIDI controller such as a MIDI keyboard, MIDI
wind controller or MIDI guitar controller.
MIDI Thru
The MIDI Thru jack is used to connect additional MIDI devices
onto the MIDI chain. MIDI Thru transmits an exact copy of the
messages received at the MIDI In jack.
Audio Outputs
Each of the Sub 1 and Sub 2 output jacks on the Morpheus are
stereo jacks. The tip of each jack (accessed when a standard phone
plug is inserted) is the left or right output of that group. The Sub
1 outputs
To Next Page
Loading...
Need help?
General
