Morpheus Operation Manual228
MIDI SPECIFICATION
COMMAND DETAILS
All parameters are sent as 14-bit signed values, LSB-MSB. (See discussion
of number conversion) numbers in the far left column are decimal
offsets into the dumps.These numbers are added to the parm base
offsets in order to do individual parameter editing. (See PARAMETER
editing cmds) Data sent to a ROM card or a card that is protected is
ignored. Requests for card data while card is not inserted will be ig-
nored. Removing the card while a dump involving card data is in
progress can cause unexpected results. (Generally, default data will be
sent. no data corruption in the box should occur.)
PRESET REQUEST
Request preset. Uses preset index values (not the same as program
numbers). Request for card presets will be ignored if card is not
present. Preset numbers are: 0-127 RAM, 128-255 ROM, 256-319
CARD. Values 0x0400+ the bank number (0-2) represent request for
banks. (Banks are blocks of 128 presets.)
F0 SysEx Status Byte
18 E-mu Mfg. ID
0C Morpheus Product ID
dd Device ID 0-15
00 Command ID
ll lsb Preset Number
mm msb Preset Number
F7 End of SysEx Status
PRESET DATA
Version 0x01 format is as follows:
F0 SysEx Status Byte
18 E-mu Mfg. ID
0C Morpheus Product ID
dd Device ID 0-15
01 Command ID - Preset Data
vv Preset Data Version
ll ls byte Preset Number
mm ms byte Preset Number
To Next Page
Loading...
Need help?
General
