Morpheus Operation Manual248
MIDI SPECIFICATION
MIDI Description Availability
Value
10 Footswitch2End Preset, Hyperpreset
11 Footswitch2Imm Preset, Hyperpreset
12 Footswitch3End Preset, Hyperpreset
13 Footswitch3Imm Preset, Hyperpreset
14 VelocityEnd Preset
15 KeyEnd Preset
• Function Generator Levels
The funcgen level parm value is comprised of two bitfields.
Funcgen Level = (levelType << 8) + levelValue
bits 8-13 = level type, 0-3
bits 0-7 = level value, +-127
The level types are defined as follows:
MIDI Description
Value
0 absolute level
1 delta level
2 random absolute level
3 random delta level
• Filter Types
Use the FILTER LIST command to get a list of the currently available
filter names, ids and transform number. the filter type number sent
via sysex are unique ids. (they are not the index into the screens) The
transform number is used to determine the active parms for that filter.
The number of parms active for any filter is determined by the num-
ber of frames in the filter.
Number of Active
Frames Parms
2 Morph
4 Morph, Frequency Track
6 Morph, Frequency Track, Transform 2
8 Morph, Frequency Track, Transform 2
To Next Page
Loading...
Need help?
General
