Edge-Core ES4625 - Ip Ssh Authentication-Retries; Ip Ssh Server-Key Size

Command Line Interface
4-38
4
Command Usage
The timeout specifies the interval the switch will wait for a response from the
client during the SSH negotiation phase. Once an SSH session has been
established, the timeout for user input is controlled by the exec-timeout
command for vty sessions.
Example
Related Commands
exec-timeout (4-15)
show ip ssh (4-41)
ip ssh authentication-retries
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the no form to restore the default setting.
Syntax
ip ssh authentication-retries count
no ip ssh authentication-retries
count – The number of authentication attempts permitted after which the
interface is reset. (Range: 1-5)
Default Setting
3
Command Mode
Global Configuration
Example
Related Commands
show ip ssh (4-41)
ip ssh server-key size
This command sets the SSH server key size. Use the no form to restore the default
setting.
Syntax
ip ssh server-key size key-size
no ip ssh server-key size
key-size – The size of server key. (Range: 512-896 bits)
Console(config)#ip ssh timeout 60
Console(config)#
Console(config)#ip ssh authentication-retires 2
Console(config)#