Edge-Core ES4625 - Radius-Server Retransmit; Radius-Server Timeout

Command Line Interface
4-74
4
Command Mode
Global Configuration
Example
radius-server retransmit
This command sets the number of retries. Use the no form to restore the default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to authenticate
logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
2
Command Mode
Global Configuration
Example
radius-server timeout
This command sets the interval between transmitting authentication requests to the
RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#
Console(config)#radius-server retransmit 5
Console(config)#
Console(config)#radius-server timeout 10
Console(config)#