Command Line Interface
4-130
4
Example
Related Commands
next-server (4-129)
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS)
name servers that are available to Microsoft DHCP clients. Use the no form to
remove the NetBIOS name server list.
Syntax
netbios-name-server address1 [address2]
no netbios-name-server
• address1 - Specifies IP address of primary NetBIOS WINS name server.
• address2 - Specifies IP address of alternate NetBIOS WINS name server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Usage Guidelines
Servers are listed in order of preference (starting with address1 as the most
preferred server).
Example
Related Commands
netbios-node-type (4-131)
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
To Next Page
Loading...
Need help?
General
